PWT-5CTO-20  WHOLE-HOUSE CARBON SYSTEM - 2 Stage System


TWO OF THE MOST EFFECTIVE WATER TREATMENT TECHNOLOGIES:
   
Stage 1: Mechanical filtration
1.0-micron Pre-Filter
Stage 2: Carbon Adsorption
10.0 micron solid activated Carbon Block
matrix (Bituminous Coal)
Dimensions: 16”W x 9”D x 27”H (plus by-pass piping)

 

  
Click here for the by-pass piping diagram  

 

  

PWT  Water Treatment Application Chart

Removes or Reduces                

         Stage 1        

        Stage 2

Particulates (Dirt, Sediment, Rust)

               Y

 

Tastes and Odors

 

             Y

Chlorine, Chloramines

 

             Y

Pesticides, Herbicides (DDT, DBCP, etc.)

 

             Y

Chemicals (THMs, TCE, PCBs, etc.)

 

             Y

 

Superior System Features  
  • Unlimited supply of water                         
  • All faucets receive pure water
  • High flow capacity                                  
  • All appliances: ice-maker, ice-water 
        dispenser, insta-hot receive pure water
  • 1 year limited warranty
    		•
       
      Note:  Household water pressure should be checked.  If pressure is high (over 80psi), a whole
               house pressure regulator valve (PRV) is recommended.  Install with a licensed plumber.       		 

           

    • Unit Cost:                      $750.00
    • Filter Replacements:      $109.00/set

                           

    PWT-5GAC-20  WHOLE-HOUSE CARBON SYSTEM -  3 Stage System

    THREE OF THE MOST EFFECTIVE WATER TREATMENT TECHNOLOGIES:
    Stage 1: Mechanical filtration
    1.0-micron Pre-Filter
     
     
    Stage 2: Carbon Adsorption
    10.0-micron solid activated Carbon Block matrix
    (Bituminous Coal)
     
     
    Stage 3: Chemical Removal Filter

    315 cubic inches of compressed granular activated carbon (Coconut Shell); prolonged contact adsorption for removal of extra high levels of chemicals, chlorine, and chloramines.
     
    Dimensions:  24”W x 9”D x 27”H (plus by-pass piping)

     

    Click here for the by-pass piping diagram

     

    PWT  Water Treatment Application Chart

    Removes or Reduces

    Stage 1

    Stage 2

    Stage 3

    Particulates (Dirt, Sediment, Rust)

    Y

     

     

    Tastes, Odors

              

    Y

    YY

    Chlorine, Chloramines

     

    Y

    YY

    Pesticides, Herbicides (DDT, DBCP, etc.)

     

    Y

    YY

    Chemicals (THMs, TCE, PCBs, MTBE, etc.)

     

    Y

    YY

     

    Superior System Features:                              

    • Unlimited supply of water                         
    • All faucets receive pure water
    • High flow capacity                                  
  • All appliances: ice-maker, ice-water 
        dispenser, insta-hot receive pure water
  • 1 year limited warranty
    		•

    Note: 

    Household water pressure should be checked, if pressure is high (over 80psi), a whole- house pressure regulator valve (PRV), is recommended. Install with a licensed plumber.
     

     

    • Unit Cost:                    $825.00
    • Filter Replacements:    $161.00

     

    Water Softeners  (Conditioners)

     

    SOLUTIONS: SOFT WATER

    Protect

    		 Your skin and complexion from hard water impurities that can cause dry skin; shave without irritation, keep hair and skin healthy.

    Spot-Free

    		 Dishes, silverware, and glasses will be crystal clear.

    Eliminate

    		 Bathtub ring, keep tile, porcelin and chrome surfaces free of spots, streaks, and stains;  cleaning tasks are made easier.

    Prevent

    		 Rock-like hard water scale formation in water using appliances, reduces plumbing repair costs.

     

    BENEFITS OF SOFT WATER: COST SAVINGS  $

    Save Soap

    		 Soft water washes better with much less soap.

    Save Appliances

    		 All water applications last longer and work more efficiently.

    Save Clothing

    		 Laundry washed in soft water will be brighter, cleaner, more comfortable, and will last longer.

    Save Energy

    		 Hot water heating costs will be reduced.

     

    The cost savings of a PWT water softener-  pays for itself.

     

    VALIDATED EQUIPMENT:  TWO-TANK SYSTEM

    Fiberglass Mineral Tank

    		 100% corrosion proof, NSF Approved.

    High-Capacity Resin

    		 Uniform bead size, FDA Approved.

    Distributor

    		 Full 1” diameter port .

    Salt Tank

    		 - Corrosion proof reservoir with molded cover
    - Brine-safety overflow protection valve

    - Air-check system
    Control Valve
    268 Autotol
    w/ 460i Timer

    - demand regeneration, high efficiency, saves water
       and regenerative (Salt or KCL)

    - durable, corrosion resistant, Noryl plastic ensuring
       long life

    - Duraflow valve disc technology provides
       frictionless seal for long service life

    - Uses less than $2.00 of electricity per year

    PWT - 30,000 - 1.0 cu. ft. Softener (30,000 grains)

    • Unit cost: $1,235.00

     PWT - 40,000 - 1.5 cu. ft. Softener (40,000 grains)
     
    • Unit cost: $1,335.00

       
    Note:  Household water pressure should be checked, if pressure is high (over 80psi) a whole-
               house pressure regulator valve(PRV), is recommended. Install with a licensed plumber.

     

     Ultra-Violet Systems -  UV

     

            UV Systems are the most practical means of destroying disease causing microorganisms in water.
            this is accomplished without harsh chemicals (Chlorine), without affecting taste or odor, or
            adding irritating or allergenic properties to the water.
       
            Standard system components include the stainless steel reactor chamber, germicidal  UV- lamp,
            pure fused quartz protective sleeve, lamp-out audio alarm, and  120Vac, 60Hz power supply.
       
            Economical purifiers operate with low power consumption at pennies a day.  Easy access to UV
            lamp for maintenance and replacement, compact, and single enclosure mounts horizontal or
            vertical.
       
     

    UV-7A 

    		Dimensions: 18”L x 4”W x  6”D     
    7gpm,   Ύ”  NPT,   19lbs
           
      UV-15A               Dimensions:  36”L x 4”W x 6”D    
    15gpm,   Ύ” or 1” NPT,  28lbs

    Note:  If waters mineral level is over 3 grains of hardness a
              softener is recommended.

              Allow for by-pass piping when sizing the dimensions.    

              Install with a licensed plumber.

    		  

     

    • UV-7A     $650.00
    • UV-15A   $795.00
       
    • UV-7B   (Bulb)   $75.00
    • UV-15B (Bulb)   $79.00

     

    Whole-House Sediment Filters

             

             Both municipal (City) water supplies and individual well water supplies can contain different
             sizes and amounts of sediment .  Sediment can clog water appliances; hot water heaters,
             washing machines, dishwashers, etc. and faucet aerators.  

                

    PWT-50S-20   Single Big-Blue Sediment Filter w/ 50 micron filter cartridge

      

             Dimensions:  8”W x 9”D x  25”H  plus by-pass piping
     
    • Unit Cost:                 $250.00
    • Filter Replacements:   $42.00
    		  
      Click here for the by-pass piping diagram
       
    PWT-50S-5S-20 Double Big-Blue Sediment Filter w/ 50 micron pre-filter and 5
                                       micron post-filter

               

    Dimensions:  16”W x 9”D x 25”H plus by-pass piping
     
    • Unit Cost:                             $725.00
    • Filter Replacements:               $84.00
       
       

               Click here for the by-pass piping diagram

     

    Note:  Other filter cartridges are also available: 100, 50, 5, 1.0 micron sizes.  Sediment  

              can vary or change from well to well or from season to season, (drought, higher

              than average rainfall, etc.) it may be necessary to adjust the size of the micron

              size and replacement cycle.              

              Household water pressure should be checked, if pressure is high (over 80psi),

              a whole-house pressure regulator valve (PRV) is recommended.

              Install with a licensed plumber.

              

    Neutralizing Filter Low Ph - CAL-40,000

                  Acid neutralizer filter raises Ph to eliminate household plumbing
             corrosion and leaks, which can be expensive to repair.  It also
             protects your family from ingesting the heavy metals
             (lead, copper, etc.) in the plumbing system.

    Validated Equipment

    Fiberglass Mineral Tank

    		 100% corrosion proof, NSF Approved w/ easy to re-fill dome plug

    Media

    		 calcite for moderately  low Ph, and Corosex  for extremely  low Ph

    Distributor

    		 Full 1” diameter port

    Control Valve
    Autotrol
    168 valve

    Durable corrosive resistant Noryl plastic ensuring long life

    Duraflo valve disc technology provides a frictionless seal for long service life.

    Dimensions:  10”Dia x 62”H (plus by-pass piping)
     
    • Unit Cost:                             $925.00